Newsletter Articles

Sometimes when you want to, need to, or are asked to do a turning that is beyond the capacity of your lathe. 99.99 % of the time, the answer, for safety’s sake, should be “NO”. When I was asked if I could turn some 36 inch long legs for a Kitchen Island. This exceeded the ...

The first step to getting a great finish on your turned vessel begins with the finish off the gouge and skew. Tool marks, tearout, and excessive sanding are a detriment to great finish and must be avoided. Begin sanding at 220 grit and finish with 320/340 grit; sanding in an oscillating ...

Story and photos by Howard King Most of this process is based on work by Stuart Moritimer. Start with a ...

First you need a blank of wood about 6″ x 6″ x 1″ thick. Draw a heart or whatever shape you would like to have on a piece of 6″ x 6″ paper and cut it out for a template. Remember, long thin or pointed protrusions will be hard to turn and can break off. Place ...