Project Articles | World Wide Wood Turners

Cranes Turned With a Paul Howard Style by Waukeene Vinson
Story and photos by Waukeene Vinson This offset jig will give you about a 3/4″ offset each direction of the center line. I chose to drill the tenon hole 1-3/8″ in diameter. It could be larger or smaller. The 1-3/8″ works out well to have enough wood to attach a 2-1/2″ to 3″ diameter ...
Creating a Tippy Top with Kade Bolger.
During the World Wide Wood Turners Meeting for 2023-10-18, Kade Bolger gave a demo on creation of Tippy Tops. If you are interested in creating a Tippy Top, you can watch the video of the week, in conjunction with the graphic below that explains how you need to cut the top to position ...
Homemade Articulated Arms with Matt Harber
Goals and construction considerations: I wanted to have a single, reachable knob to adjust the entire arm. This implies that at least one set of arms from both adjustable sections must be on the same bolt. I wanted the base to rotate and be flexible in case I changed my mounting plan. Terminus mount must contain a ...
Project – Christmas Ornament by Walt Wager
Project – Christmas Ornament Original Author – Nick Cook Outline by Walt Wager Video demonstration by Walt Wager Nick Cook authored the article “Tis the Season, Again: Turning an Icicle Snowman” in The American Woodturner , 17.4:41-46. The article was republished in “Elements of Woodturning: Turning Holiday Ornaments”, published by the American Association of Woodturners, in 2013. This ...
Wig Stand for Cancer Support By Kade Bolger
The following has been provided by Kade Bolger in response to our meeting request to provide more information about the wig stand project that he is currently involved in. Multiple club members were interested in knowing more. Kade offered a free Zoom meeting on 12/5/2020, teaching how to make this stand. Unfortunately, we are ...
Seam Ripper/Turner by Dick Stohr
The following articles explains how to build a Seam Ripper/Turner for your favorite Seamstress Seam Ripper Purchase Seam Ripper, Amazon.com 30 or 48 in a pack (about $0.37 each ripper) or Walmart $1.50 each. Remove the bumps on ripper cap so it will fit in a smaller hole. Select a 1x1x11 turning blank wood of choice. Mount on ...

If you have a project article you would like published, please let us know. We would love to publish it on our site. Let us know or send us a copy below: